Centrum Machinationis Gantry Quinque-Axium Seriei PM-GUN
Proprietates
Haec series productorum est centrum machinationis quinque-axium pontis, altae rigiditatis, ab ipsis elaboratum. Structuram trabium symmetricarum "box-in-box" adhibet, ut necessitatibus processus partium e titanio, mixtura altae temperaturae, aliarumque e materia torquenti, altae rigiditatis, et altae efficientiae, satisfaciat.
Series PM-GUN
Structura transversa "capsae intra capsam" altae rigiditatis capite duplici oscillante aeris conditionati magnae potentiae et magno torque instructa est, quod facultatem secandi validam et stabilitatem praecisionis habet.
Crossbeam
Centrum machinationis CNC portale structuram transversam symmetricam "box-in-box" (capsulam in arca) et configurationem quattuor semitarum amplae latitudinis adhibet, et labrum mobile in medio transversae collocatur, ita ut tota machina aequaliter tentetur, quod vitam machinae valde emendat.duxet accuratae retentio.
Caput duplex oscillans aeris conditionati
Caput oscillatorium duplex importatum, altae praecisionis et altae dynamicae, fuso electrico magnae celeritatis et magno torque instructum, requisitis processus altae efficientiae et fortis sectionis partium satisfacere potest.
Impulsus motoris duplicis
Longa-iterImpulsor structuram duorum motorum cum cremagliera dentata et impedimento motus adoptat, quae proprietates habet rigiditatis transmissionis firmae, praecisionis altae, et sustentationis facilis.
Magazina instrumentorum
Varia genera magazinarum instrumentorum, 24/32/40/60, praesto sunt ad horas machinationis auxiliaris efficaciter breviandas.
Detectio positionis circuli plene clausi
Detectio positionis axium X, Y, et Z centri machinationis CNC portalis quinque axium praecisionem importatam adhibet.scala opticas, et axes A et C encoders angulares altae praecisionis adoptant ut plenam responsionem positionis clausae-circuiti consequantur ad plenam moderationem clausa-circuiti-circuiti efficiendam.machina, ita accuratam positionis machinae conservando.
Specificationes Technicae
| Res | Unitas | RFPM2040GUN | RFPM2060GUN | RFPM2540GUN | RFPM2560GUN |
| Spatium processus |
|
|
|
|
|
| Iter axium X/Y/Z | mm | 4000/2200/1000 | 6000/2200/1000 | 4000/2700/1000 | 6000/2700/1000 |
| Spatium rotationis axis A/C | ° | ±110/±360 | ±110/±360 | ±110/±360 | ±110/±360 |
| Latitudo effectiva porticus | mm | 3200 | 3200 | 3700 | 3700 |
| Distantia a naso fusi ad mensam laboris | mm | 100-1100 | 100-1100 | 100-1100 | 100-1100 |
| Mensa laboris |
|
|
|
|
|
| Dimensiones mensae laboris | mm | 2000 × 4000 | 2000 × 6000 | 2500×4000 | 2500 × 6000 |
| Capacitas oneris mensae laboris ferendi | t/m² | 5 | 5 | 5 | 5 |
| Specificationes fissurae T | mm | 28 | 28 | 28 | 28 |
| Impellere cibum |
|
|
|
|
|
| Maxima celeritas alimentationis X/Y/Z | m/min | XV/XV/XV | XV/XV/XV | XV/XV/XV | XV/XV/XV |
| Maxima celeritas alimentationis A/C | rpm | 60 | 60 | 60 | 60 |
| Celeritas celeris X/Y/Z | m/min | XX/XX/XX | XX/XX/XX | XX/XX/XX | XX/XX/XX |
| Aeris conditio celeris | rpm | centum | centum | centum | centum |
| Fusus |
|
|
|
|
|
| Modus agendi |
| Fusus electricus | Fusus electricus | Fusus electricus | Fusus electricus |
| Maxima celeritas fusi | rpm | 7000 | 7000 | 7000 | 7000 |
| Potentia fusi (S1/S6-40%) | Kw | 50/60 | 50/60 | 50/60 | 50/60 |
| Momentum torquens fusi (S1/S6-40%) | Nm | 318/382 | 318/382 | 318/382 | 318/382 |
| Conus fusi |
| HSK-A100 | HSK-A100 | HSK-A100 | HSK-A100 |
| Magazina instrumentorum (ad libitum) |
|
|
|
|
|
| Capacitas magazinae instrumentorum | T | 24 | 24 | 24 | 24 |
| Typus tenendi instrumenti |
| HSK-A100 | HSK-A100 | HSK-A100 | HSK-A100 |
| Diameter instrumenti maximus | mm | ф125/ф170 | ф125/ф170 | ф125/ф170 | ф125/ф170 |
| Longitudo instrumenti maxima | mm | trecenti | trecenti | trecenti | trecenti |
| Pondus instrumenti maximum | kg | 15 | 15 | 15 | 15 |
| Accuratio |
|
|
|
|
|
| Accuratio positionis X/Y/Z | mm | 0.020/0.012/0.014 | 0.028/0.012/0.014 | 0.020/0.018/0.014 | 0.028/0.018/0.014 |
| Repetibilitas X/Y/Z | mm | 0.012/0.010/0.010 | 0.018/0.010/0.010 | 0.012/0.012/0.010 | 0.018/0.012/0.010 |
| Alii |
|
|
|
|
|
| Pondus machinae | t | 67 | 75 | 70 | 80 |
| Dimensiones machinae (L × L × A) | cm | 900×670×600 | 1100×670×600 | 900×720×600 | 1100×720×600 |
| Res | Unitas | RFPM3040GUN | RFPM3060GUN | RFPM3560GUN | RFPM3580GUN |
| Spatium processus |
|
|
|
|
|
| Iter axium X/Y/Z | mm | 4000/3200/1000 | 6000/3200/1000 | 6000/3700/1000 | 8000/3700/1000 |
| Spatium rotationis axis A/C | ° | ±110/±360 | ±110/±360 | ±105/±360 | ±105/±360 |
| Latitudo effectiva porticus | mm | 4200 | 4200 | 4700 | 4700 |
| Distantia a naso fusi ad mensam laboris | mm | 100-1100 | 100-1100 | 100-1100 | 100-1100 |
| Mensa laboris |
|
|
|
|
|
| Dimensiones mensae laboris | mm | 3000×4000 | 3000 × 6000 | 3500 × 6000 | 3500×8000 |
| Capacitas oneris mensae laboris ferendi | t/m² | 5 | 5 | 5 | 5 |
| Specificationes fissurae T | mm | 28 | 28 | 28 | 28 |
| Impellere cibum |
|
|
|
|
|
| Maxima celeritas alimentationis X/Y/Z | m/min | XV/XV/XV | XV/XV/XV | XV/XV/XV | XV/XV/XV |
| Maxima celeritas alimentationis A/C | rpm | 60 | 60 | 60 | 60 |
| Celeritas celeris X/Y/Z | m/min | XX/XX/XX | XX/XX/XX | XX/XX/XX | XX/XX/XX |
| Aeris conditio celeris | rpm | centum | centum | centum | centum |
| Fusus |
|
|
|
|
|
| Modus agendi |
| Fusus electricus | Fusus electricus | Fusus electricus | Fusus electricus |
| Maxima celeritas fusi | rpm | 7000 | 7000 | 7000 | 7000 |
| Potentia fusi (S1/S6-40%) | Kw | 50/60 | 50/60 | 50/60 | 50/60 |
| Momentum torquens fusi (S1/S6-40%) | Nm | 318/382 | 318/382 | 318/382 | 318/382 |
| Conus fusi |
| HSK-A100 | HSK-A100 | HSK-A100 | HSK-A100 |
| Magazina instrumentorum (ad libitum) |
|
|
|
|
|
| Capacitas magazinae instrumentorum | T | 24 | 24 | 24 | 24 |
| Typus tenendi instrumenti |
| HSK-A100 | HSK-A100 | HSK-A100 | HSK-A100 |
| Diameter instrumenti maximus | mm | ф125/ф170 | ф125/ф170 | ф125/ф170 | ф125/ф170 |
| Longitudo instrumenti maxima | mm | trecenti | trecenti | trecenti | trecenti |
| Pondus instrumenti maximum | kg | 15 | 15 | 15 | 15 |
| Accuratio |
|
|
|
|
|
| Accuratio positionis X/Y/Z | mm | 0.020/0.018/0.014 | 0.028/0.018/0.014 | 0.028/0.024/0.014 | 0.032/0.024/0.014 |
| Repetibilitas X/Y/Z | mm | 0.012/0.012/0.010 | 0.018/0.012/0.010 | 0.020/0.016/0.010 | 0.020/0.016/0.010 |
| Alii |
|
|
|
|
|
| Pondus machinae | t | 75 | 85 | 90 | 105 |
| Dimensiones machinae (L × L × A) | cm | 900×770×600 | 1100×770×600 | 1100×820×600 | 1300×820×600 |
Haec series productorum est centrum machinationis quinque-axium pontis, altae rigiditatis, ab ipsis elaboratum. Structuram trabium symmetricarum "box-in-box" adhibet, ut necessitatibus processus partium e titanio, mixtura altae temperaturae, aliarumque e materia torquenti, altae rigiditatis, et altae efficientiae, satisfaciat.
Series PM-GUN
Structura transversa "capsae intra capsam" altae rigiditatis capite duplici oscillante aeris conditionati magnae potentiae et magno torque instructa est, quod facultatem secandi validam et stabilitatem praecisionis habet.
Crossbeam
Structuram transversam symmetricam "capsae in capsa" (capsae in arca) habet, configurationem quattuor semitarum amplae latitudinis, et crustam labilem in medio transversae collocat, ita ut tota machina aequaliter tentetur, quod vitam ductoris et retentionem accurationis magnopere auget.
Caput duplex oscillans aeris conditionati
Caput oscillatorium duplex importatum, altae praecisionis et altae dynamicae, fuso electrico magnae celeritatis et magno torque instructum, requisitis processus altae efficientiae et fortis sectionis partium satisfacere potest.
Impulsus motoris duplicis
Impulsus longi itineris structuram duorum motorum cum cremagliera dentata et impedimento motus adoptat, quae proprietates transmissionis firmae, altae praecisionis, et facilis sustentationis habet.
Magazina instrumentorum
Varia genera magazinarum instrumentorum, 24/32/40/60, praesto sunt ad horas machinationis auxiliaris efficaciter breviandas.
Detectio positionis circuli plene clausi
Detectio positionis axium X, Y, et Z machinae instrumenti utitur scalas opticas praecisionis importatas, et axes A et C adhibent encoders angulares altae praecisionis ad plenam responsionem positionis circuli clausi assequendam, ut plena gubernatio circuli clausi machinae efficiatur, ita accuratio positionis machinae curatur.
| Res | Unitas | RFPM2040GUN | RFPM2060GUN | RFPM2540GUN | RFPM2560GUN |
| Spatium processus | |||||
| Iter axium X/Y/Z | mm | 4000/2200/1000 | 6000/2200/1000 | 4000/2700/1000 | 6000/2700/1000 |
| Spatium rotationis axis A/C | ° | ±110/±360 | ±110/±360 | ±110/±360 | ±110/±360 |
| Latitudo effectiva porticus | mm | 3200 | 3200 | 3700 | 3700 |
| Distantia a naso fusi ad mensam laboris | mm | 100-1100 | 100-1100 | 100-1100 | 100-1100 |
| Mensa laboris | |||||
| Dimensiones mensae laboris | mm | 2000 × 4000 | 2000 × 6000 | 2500×4000 | 2500 × 6000 |
| Capacitas oneris mensae laboris ferendi | t/m² | 5 | 5 | 5 | 5 |
| Specificationes fissurae T | mm | 28 | 28 | 28 | 28 |
| Impellere cibum | |||||
| Maxima celeritas alimentationis X/Y/Z | m/min | XV/XV/XV | XV/XV/XV | XV/XV/XV | XV/XV/XV |
| Maxima celeritas alimentationis A/C | rpm | 60 | 60 | 60 | 60 |
| Celeritas celeris X/Y/Z | m/min | XX/XX/XX | XX/XX/XX | XX/XX/XX | XX/XX/XX |
| Aeris conditio celeris | rpm | centum | centum | centum | centum |
| Fusus | |||||
| Modus agendi | Fusus electricus | Fusus electricus | Fusus electricus | Fusus electricus | |
| Maxima celeritas fusi | rpm | 7000 | 7000 | 7000 | 7000 |
| Potentia fusi (S1/S6-40%) | Kw | 50/60 | 50/60 | 50/60 | 50/60 |
| Momentum torquens fusi (S1/S6-40%) | Nm | 318/382 | 318/382 | 318/382 | 318/382 |
| Conus fusi | HSK-A100 | HSK-A100 | HSK-A100 | HSK-A100 | |
| Magazina instrumentorum (ad libitum) | |||||
| Capacitas magazinae instrumentorum | T | 24 | 24 | 24 | 24 |
| Typus tenendi instrumenti | HSK-A100 | HSK-A100 | HSK-A100 | HSK-A100 | |
| Diameter instrumenti maximus | mm | ф125/ф170 | ф125/ф170 | ф125/ф170 | ф125/ф170 |
| Longitudo instrumenti maxima | mm | trecenti | trecenti | trecenti | trecenti |
| Pondus instrumenti maximum | kg | 15 | 15 | 15 | 15 |
| Accuratio | |||||
| Accuratio positionis X/Y/Z | mm | 0.020/0.012/0.014 | 0.028/0.012/0.014 | 0.020/0.018/0.014 | 0.028/0.018/0.014 |
| Repetibilitas X/Y/Z | mm | 0.012/0.010/0.010 | 0.018/0.010/0.010 | 0.012/0.012/0.010 | 0.018/0.012/0.010 |
| Alii | |||||
| Pondus machinae | t | 67 | 75 | 70 | 80 |
| Dimensiones machinae (L × L × A) | cm | 900×670×600 | 1100×670×600 | 900×720×600 | 1100×720×600 |
| Res | Unitas | RFPM3040GUN | RFPM3060GUN | RFPM3560GUN | RFPM3580GUN |
| Spatium processus | |||||
| Iter axium X/Y/Z | mm | 4000/3200/1000 | 6000/3200/1000 | 6000/3700/1000 | 8000/3700/1000 |
| Spatium rotationis axis A/C | ° | ±110/±360 | ±110/±360 | ±105/±360 | ±105/±360 |
| Latitudo effectiva porticus | mm | 4200 | 4200 | 4700 | 4700 |
| Distantia a naso fusi ad mensam laboris | mm | 100-1100 | 100-1100 | 100-1100 | 100-1100 |
| Mensa laboris | |||||
| Dimensiones mensae laboris | mm | 3000×4000 | 3000 × 6000 | 3500 × 6000 | 3500×8000 |
| Capacitas oneris mensae laboris ferendi | t/m² | 5 | 5 | 5 | 5 |
| Specificationes fissurae T | mm | 28 | 28 | 28 | 28 |
| Impellere cibum | |||||
| Maxima celeritas alimentationis X/Y/Z | m/min | XV/XV/XV | XV/XV/XV | XV/XV/XV | XV/XV/XV |
| Maxima celeritas alimentationis A/C | rpm | 60 | 60 | 60 | 60 |
| Celeritas celeris X/Y/Z | m/min | XX/XX/XX | XX/XX/XX | XX/XX/XX | XX/XX/XX |
| Aeris conditio celeris | rpm | centum | centum | centum | centum |
| Fusus | |||||
| Modus agendi | Fusus electricus | Fusus electricus | Fusus electricus | Fusus electricus | |
| Maxima celeritas fusi | rpm | 7000 | 7000 | 7000 | 7000 |
| Potentia fusi (S1/S6-40%) | Kw | 50/60 | 50/60 | 50/60 | 50/60 |
| Momentum torquens fusi (S1/S6-40%) | Nm | 318/382 | 318/382 | 318/382 | 318/382 |
| Conus fusi | HSK-A100 | HSK-A100 | HSK-A100 | HSK-A100 | |
| Magazina instrumentorum (ad libitum) | |||||
| Capacitas magazinae instrumentorum | T | 24 | 24 | 24 | 24 |
| Typus tenendi instrumenti | HSK-A100 | HSK-A100 | HSK-A100 | HSK-A100 | |
| Diameter instrumenti maximus | mm | ф125/ф170 | ф125/ф170 | ф125/ф170 | ф125/ф170 |
| Longitudo instrumenti maxima | mm | trecenti | trecenti | trecenti | trecenti |
| Pondus instrumenti maximum | kg | 15 | 15 | 15 | 15 |
| Accuratio | |||||
| Accuratio positionis X/Y/Z | mm | 0.020/0.018/0.014 | 0.028/0.018/0.014 | 0.028/0.024/0.014 | 0.032/0.024/0.014 |
| Repetibilitas X/Y/Z | mm | 0.012/0.012/0.010 | 0.018/0.012/0.010 | 0.020/0.016/0.010 | 0.020/0.016/0.010 |
| Alii | |||||
| Pondus machinae | t | 75 | 85 | 90 | 105 |
| Dimensiones machinae (L × L × A) | cm | 900×770×600 | 1100×770×600 | 1100×820×600 | 1300×820×600 |
Categoriae productorum
-
Centrum Machinationis CNC Altae Rigiditatis Seriei VC cum...
-
Ductor Linearis Columnae Mobilis Horizontalis Seriei HP...
-
Ductor Linearis Columnae Mobilis Horizontalis Series HT...
-
Machinae CNC quattuor viarum, robustae, series VS...
-
Centrum Machinationis CNC Seriei V cum Alta Rigiditate
-
Centrum Machinationis CNC Duplicis Columnae Seriei X
-
Centrum Machinationis CNC Horizontale 5-Axium TKG1600
-
Centrum Compositum CNC Verticale Tornendi et Fresandi...
-
Centrum Machinationis CNC Altae Velocitatis Seriei GM
-
Fresa CNC Altae Velocitatis Series GT
-
Tornus CNC Duplicis Fusus SK32
-
Centrum Machinationis Verticale CNC RFTV510 Pro Rotis...