Centrum Machinationis Gantry Quinque-Axium Seriei PM-U
Proprietates
Haec series productorum est centrum machinationis quinque-axium portale, a se ipso elaboratum, structura compacta, excellenti effectu, magna celeritate, magna praecisione, magna rigiditate, et cetera. Aptum est ad machinandas partes in variis industriis, ut puta in industria aëronautica, machinis ingeniosis, transportatione ferriviaria, formis praecisionis, energia eolica, et cetera.
Series PM-U
Caput duplex oscillationis aeris conditionati celeris et praecisi adhibet, et fuso electrico magnae potentiae et momenti magni, qui facultatem secandi validam habet, instructum est.
Caput duplex oscillans aeris conditionati
Machina fresatoria CNC typi portalis capita oscillatoria duplici importata altae praecisionis et altae dynamicae adhibet, et fuso electrico altae celeritatis et magno torque instructa est, requisitis altis praecisionis partium, qualitatis superficiei, et efficientiae processus satisfaciens.
Designatio structurae altae rigiditatis optimizata
Methodi designandi elementorum finitorum adhibentur ad analyses staticas et modales variarum partium centri machinationis portalis CNC peragendas, ut structura producti ulterius optimizetur et designatio structuralis altae rigiditatis et levitatis consequatur.
Structura auxiliaris cochleae sustentans
Longa-iterCochlea principalis fulcro fluctuante instructa est, quod celeritatem limitatam cochleae principalis et stabilitatem rotationis celeris efficaciter augere potest.
Magazina instrumentorum
Varia genera magazinarum instrumentorum, 24/32/40/60, praesto sunt ad horas machinationis auxiliaris efficaciter breviandas.
Alta rigiditate sustentata
ThemachinaLectus tribus ducibus magnis magnitudinis instructus est, qui sufficientem rigiditatem sustentationis et praecisionem retentionis praebent.
Designatio salutis humanizata
Designatio labyrinthi laminae metallicae in fundomensa laborisImpedit ne fragmenta ferrea in machinam CNC portalem fresatricem ingrediantur lectus. Canalis integratus ad frusta removenda problema effluxus aquae fundamentaliter eliminat.
Specificationes Technicae
| Res | Unitas | RFPM3028U | RFPM4028U | RFPM6028U | RFPM4033U |
| Spatium processus |
|
|
|
|
|
| Iter axium X/Y/Z | mm | 3200/3200/1000 | 4200/3200/1000 | 6200/3200/1000 | 4200/3700/1000 |
| Spatium rotationis axis A/C | ° | ±105/±360 | ±105/±360 | ±105/±360 | ±105/±360 |
| Latitudo effectiva porticus | mm | 2800 | 2800 | 2800 | 3300 |
| Distantia a naso fusi ad mensam laboris | mm | 200-1200 | 200-1200 | 200-1200 | 200-1200 |
| Mensa laboris |
|
|
|
|
|
| Dimensiones mensae laboris | mm | 2000 × 3000 | 2000 × 4000 | 2000 × 6000 | 2500×4000 |
| Capacitas oneris mensae laboris ferendi | t | 16 | 20 | 26 | 22 |
| Specificationes fissurae T | mm | 28 | 28 | 28 | 28 |
| Impellere cibum |
|
|
|
|
|
| Maxima celeritas alimentationis X/Y/Z | m/min | XII/XII/XII | XII/XII/XII | XII/XII/XII | X/X/X |
| Maxima celeritas alimentationis A/C | rpm | 60 | 60 | 60 | 60 |
| Celeritas celeris X/Y/Z | m/min | XX/XX/XV | XX/XX/XV | XV/XX/XV | XV/XV/XV |
| Aeris conditio celeris | rpm | centum | centum | centum | centum |
| Fusus |
|
|
|
|
|
| Modus agendi |
| Fusus electricus | Fusus electricus | Fusus electricus | Fusus electricus |
| Maxima celeritas fusi | rpm | 7000 | 7000 | 7000 | 7000 |
| Potentia fusi (S1/S6) | Kw | 50/60 | 50/60 | 50/60 | 50/60 |
| Momentum torquens fusi (S1/S6) | Nm | 318/382 | 318/382 | 318/382 | 318/382 |
| Conus fusi |
| HSK-A100 | HSK-A100 | HSK-A100 | HSK-A100 |
| Magazina instrumentorum (ad libitum) |
|
|
|
|
|
| Capacitas magazinae instrumentorum | T | 24 | 24 | 24 | 24 |
| Typus tenendi instrumenti |
| HSK-A100 | HSK-A100 | HSK-A100 | HSK-A100 |
| Diameter instrumenti maximus | mm | ф110/ф200 | ф110/ф200 | ф110/ф200 | ф110/ф200 |
| Longitudo instrumenti maxima | mm | 350 | 350 | 350 | 350 |
| Pondus instrumenti maximum | kg | 20 | 20 | 20 | 20 |
| Accuratio |
|
|
|
|
|
| Accuratio positionis X/Y/Z | mm | 0.018/0.018/0.014 | 0.020/0.018/0.014 | 0.028/0.018/0.014 | 0.020/0.018/0.014 |
| Repetibilitas X/Y/Z | mm | 0.012/0.012/0.010 | 0.012/0.012/0.010 | 0.018/0.012/0.010 | 0.012/0.012/0.010 |
| Alii |
|
|
|
|
|
| Pondus machinae | t | 57 | 63 | 75 | 70 |
| Dimensiones machinae (L × L × A) | cm | 910×670×650 | 1110×670×650 | 1510×670×650 | 1110×720×650 |
| Res | Unitas | RFPM6033U | RFPM8033U | RFPM6038U | RFPM8038U |
| Spatium processus |
|
|
|
|
|
| Iter axium X/Y/Z | mm | 6200/3700/1000 | 8500/3700/1000 | 6200/4200/1000 | 8500/4200/1000 |
| Spatium rotationis axis A/C | ° | ±105/±360 | ±105/±360 | ±105/±360 | ±105/±360 |
| Latitudo effectiva porticus | mm | 3300 | 3300 | 3800 | 3800 |
| Distantia a naso fusi ad mensam laboris | mm | 200-1200 | 200-1200 | 200-1200 | 200-1200 |
| Mensa laboris |
|
|
|
|
|
| Dimensiones mensae laboris | mm | 2500 × 6000 | 2500×8000 | 3000 × 6000 | 3000×8000 |
| Capacitas oneris mensae laboris ferendi | t | 30 | 35 | 35 | 40 |
| Specificationes fissurae T | mm | 28 | 28 | 28 | 28 |
| Impellere cibum |
|
|
|
|
|
| Maxima celeritas alimentationis X/Y/Z | m/min | VIII/X/X | VIII/X/X | VIII/X/X | VIII/X/X |
| Maxima celeritas alimentationis A/C | rpm | 60 | 60 | 60 | 60 |
| Celeritas celeris X/Y/Z | m/min | XV Kalendas Ianuarias (vel XV Kalendas Ianuarias) | XV Kalendas Octobres MMXV | XV Kalendas Ianuarias (vel XV Kalendas Ianuarias) | XV Kalendas Octobres MMXV |
| Aeris conditio celeris | rpm | centum | centum | centum | centum |
| Fusus |
|
|
|
|
|
| Modus agendi |
| Fusus electricus | Fusus electricus | Fusus electricus | Fusus electricus |
| Maxima celeritas fusi | rpm | 7000 | 7000 | 7000 | 7000 |
| Potentia fusi (S1/S6-40%) | Kw | 50/60 | 50/60 | 50/60 | 50/60 |
| Momentum torquens fusi (S1/S6-40%) | Nm | 318/382 | 318/382 | 318/382 | 318/382 |
| Conus fusi |
| HSK-A100 | HSK-A100 | HSK-A100 | HSK-A100 |
| Magazina instrumentorum (ad libitum) |
|
|
|
|
|
| Capacitas magazinae instrumentorum | T | 24 | 24 | 24 | 24 |
| Typus tenendi instrumenti |
| HSK-A100 | HSK-A100 | HSK-A100 | HSK-A100 |
| Diameter instrumenti maximus | mm | ф110/ф200 | ф110/ф200 | ф110/ф200 | ф110/ф200 |
| Longitudo instrumenti maxima | mm | 350 | 350 | 350 | 350 |
| Pondus instrumenti maximum | kg | 20 | 20 | 20 | 20 |
| Accuratio |
|
|
|
|
|
| Accuratio positionis X/Y/Z | mm | 0.028/0.018/0.014 | 0.032/0.018/0.014 | 0.028/0.024/0.014 | 0.032/0.024/0.014 |
| Repetibilitas X/Y/Z | mm | 0.018/0.012/0.010 | 0.020/0.012/0.010 | 0.018/0.016/0.010 | 0.020/0.016/0.010 |
| Alii |
|
|
|
|
|
| Pondus machinae | t | 84 | centum | 94 | 115 |
| Dimensiones machinae (L × L × A) | cm | 1550×720×650 | 2050×720×650 | 1550×800×650 | 2050×800×650 |
Haec series productorum est centrum machinationis quinque-axium portale, a se ipso elaboratum, structura compacta, excellenti effectu, magna celeritate, magna praecisione, magna rigiditate, et cetera. Aptum est ad machinandas partes in variis industriis, ut puta in industria aëronautica, machinis ingeniosis, transportatione ferriviaria, formis praecisionis, energia eolica, et cetera.
Series PM-U
Caput duplex oscillationis aeris conditionati celeris et praecisi adhibet, et fuso electrico magnae potentiae et momenti magni, qui facultatem secandi validam habet, instructum est.
Caput duplex oscillans aeris conditionati
Capita oscillatoria duplicia importata, summae praecisionis et dynamicae, adhibet, et fuso electrico celerrimo et magno torque instructum est, altis requisitis praecisionis partium, qualitatis superficiei, et efficientiae processus satisfaciens.
Designatio structurae altae rigiditatis optimizata
Methodi designandi elementorum finitorum adhibentur ad analyses staticas et modales variarum partium machinae peragendas, ut structura producti ulterius optimizetur et designatio structuralis magnae rigiditatis et levis efficiatur.
Structura auxiliaris cochleae sustentans
Cochlea principalis longae cursus fulcro fluctuante instructa est, quod celeritatem limitatam cochleae principalis et stabilitatem rotationis celeris efficaciter augere potest.
Magazina instrumentorum
Varia genera magazinarum instrumentorum, 24/32/40/60, praesto sunt ad horas machinationis auxiliaris efficaciter breviandas.
Alta rigiditate sustentata
Basis machinae tribus ducibus magnis magnitudinis instructa est, quae sufficientem rigiditatem sustentationis et praecisionem retentionis praebent.
Designatio salutis humanizata
Labyrinthus laminae metallicae in fundo mensae laboris impedit ne ferri fragmenta in alveum machinae ingrediantur. Alveus integratus ad fragmenta removenda problema effluxus aquae fundamentaliter eliminat.
| Res | Unitas | RFPM3028U | RFPM4028U | RFPM6028U | RFPM4033U |
| Spatium processus | |||||
| Iter axium X/Y/Z | mm | 3200/3200/1000 | 4200/3200/1000 | 6200/3200/1000 | 4200/3700/1000 |
| Spatium rotationis axis A/C | ° | ±105/±360 | ±105/±360 | ±105/±360 | ±105/±360 |
| Latitudo effectiva porticus | mm | 2800 | 2800 | 2800 | 3300 |
| Distantia a naso fusi ad mensam laboris | mm | 200-1200 | 200-1200 | 200-1200 | 200-1200 |
| Mensa laboris | |||||
| Dimensiones mensae laboris | mm | 2000 × 3000 | 2000 × 4000 | 2000 × 6000 | 2500×4000 |
| Capacitas oneris mensae laboris ferendi | t | 16 | 20 | 26 | 22 |
| Specificationes fissurae T | mm | 28 | 28 | 28 | 28 |
| Impellere cibum | |||||
| Maxima celeritas alimentationis X/Y/Z | m/min | XII/XII/XII | XII/XII/XII | XII/XII/XII | X/X/X |
| Maxima celeritas alimentationis A/C | rpm | 60 | 60 | 60 | 60 |
| Celeritas celeris X/Y/Z | m/min | XX/XX/XV | XX/XX/XV | XV/XX/XV | XV/XV/XV |
| Aeris conditio celeris | rpm | centum | centum | centum | centum |
| Fusus | |||||
| Modus agendi | Fusus electricus | Fusus electricus | Fusus electricus | Fusus electricus | |
| Maxima celeritas fusi | rpm | 7000 | 7000 | 7000 | 7000 |
| Potentia fusi (S1/S6) | Kw | 50/60 | 50/60 | 50/60 | 50/60 |
| Momentum torquens fusi (S1/S6) | Nm | 318/382 | 318/382 | 318/382 | 318/382 |
| Conus fusi | HSK-A100 | HSK-A100 | HSK-A100 | HSK-A100 | |
| Magazina instrumentorum (ad libitum) | |||||
| Capacitas magazinae instrumentorum | T | 24 | 24 | 24 | 24 |
| Typus tenendi instrumenti | HSK-A100 | HSK-A100 | HSK-A100 | HSK-A100 | |
| Diameter instrumenti maximus | mm | ф110/ф200 | ф110/ф200 | ф110/ф200 | ф110/ф200 |
| Longitudo instrumenti maxima | mm | 350 | 350 | 350 | 350 |
| Pondus instrumenti maximum | kg | 20 | 20 | 20 | 20 |
| Accuratio | |||||
| Accuratio positionis X/Y/Z | mm | 0.018/0.018/0.014 | 0.020/0.018/0.014 | 0.028/0.018/0.014 | 0.020/0.018/0.014 |
| Repetibilitas X/Y/Z | mm | 0.012/0.012/0.010 | 0.012/0.012/0.010 | 0.018/0.012/0.010 | 0.012/0.012/0.010 |
| Alii | |||||
| Pondus machinae | t | 57 | 63 | 75 | 70 |
| Dimensiones machinae (L × L × A) | cm | 910×670×650 | 1110×670×650 | 1510×670×650 | 1110×720×650 |
| Res | Unitas | RFPM6033U | RFPM8033U | RFPM6038U | RFPM8038U |
| Spatium processus | |||||
| Iter axium X/Y/Z | mm | 6200/3700/1000 | 8500/3700/1000 | 6200/4200/1000 | 8500/4200/1000 |
| Spatium rotationis axis A/C | ° | ±105/±360 | ±105/±360 | ±105/±360 | ±105/±360 |
| Latitudo effectiva porticus | mm | 3300 | 3300 | 3800 | 3800 |
| Distantia a naso fusi ad mensam laboris | mm | 200-1200 | 200-1200 | 200-1200 | 200-1200 |
| Mensa laboris | |||||
| Dimensiones mensae laboris | mm | 2500 × 6000 | 2500×8000 | 3000 × 6000 | 3000×8000 |
| Capacitas oneris mensae laboris ferendi | t | 30 | 35 | 35 | 40 |
| Specificationes fissurae T | mm | 28 | 28 | 28 | 28 |
| Impellere cibum | |||||
| Maxima celeritas alimentationis X/Y/Z | m/min | VIII/X/X | VIII/X/X | VIII/X/X | VIII/X/X |
| Maxima celeritas alimentationis A/C | rpm | 60 | 60 | 60 | 60 |
| Celeritas celeris X/Y/Z | m/min | XV Kalendas Ianuarias (vel XV Kalendas Ianuarias) | XV Kalendas Octobres MMXV | XV Kalendas Ianuarias (vel XV Kalendas Ianuarias) | XV Kalendas Octobres MMXV |
| Aeris conditio celeris | rpm | centum | centum | centum | centum |
| Fusus | |||||
| Modus agendi | Fusus electricus | Fusus electricus | Fusus electricus | Fusus electricus | |
| Maxima celeritas fusi | rpm | 7000 | 7000 | 7000 | 7000 |
| Potentia fusi (S1/S6-40%) | Kw | 50/60 | 50/60 | 50/60 | 50/60 |
| Momentum torquens fusi (S1/S6-40%) | Nm | 318/382 | 318/382 | 318/382 | 318/382 |
| Conus fusi | HSK-A100 | HSK-A100 | HSK-A100 | HSK-A100 | |
| Magazina instrumentorum (ad libitum) | |||||
| Capacitas magazinae instrumentorum | T | 24 | 24 | 24 | 24 |
| Typus tenendi instrumenti | HSK-A100 | HSK-A100 | HSK-A100 | HSK-A100 | |
| Diameter instrumenti maximus | mm | ф110/ф200 | ф110/ф200 | ф110/ф200 | ф110/ф200 |
| Longitudo instrumenti maxima | mm | 350 | 350 | 350 | 350 |
| Pondus instrumenti maximum | kg | 20 | 20 | 20 | 20 |
| Accuratio | |||||
| Accuratio positionis X/Y/Z | mm | 0.028/0.018/0.014 | 0.032/0.018/0.014 | 0.028/0.024/0.014 | 0.032/0.024/0.014 |
| Repetibilitas X/Y/Z | mm | 0.018/0.012/0.010 | 0.020/0.012/0.010 | 0.018/0.016/0.010 | 0.020/0.016/0.010 |
| Alii | |||||
| Pondus machinae | t | 84 | centum | 94 | 115 |
| Dimensiones machinae (L × L × A) | cm | 1550×720×650 | 2050×720×650 | 1550×800×650 | 2050×800×650 |
Categoriae productorum
-
Centrum Machinationis CNC Altae Rigiditatis Seriei VC cum...
-
Ductor Linearis Columnae Mobilis Horizontalis Seriei HP...
-
Ductor Linearis Columnae Mobilis Horizontalis Series HT...
-
Machinae CNC quattuor viarum, robustae, series VS...
-
Centrum Machinationis CNC Seriei V cum Alta Rigiditate
-
Centrum Machinationis CNC Duplicis Columnae Seriei X
-
Centrum Machinationis CNC Horizontale 5-Axium TKG1600
-
Centrum Compositum CNC Verticale Tornendi et Fresandi...
-
Centrum Machinationis CNC Altae Velocitatis Seriei GM
-
Fresa CNC Altae Velocitatis Series GT
-
Tornus CNC Duplicis Fusus SK32
-
Centrum Machinationis Verticale CNC RFTV510 Pro Rotis...